HPE Storage Users Group
https://3parug.org/

cpmaint
https://3parug.org/viewtopic.php?f=18&t=352
Page 1 of 3

Author:  thebink65 [ Mon Jun 24, 2013 4:37 pm ]
Post subject:  cpmaint

We have a P7200 in our customer demo lab and I'd like to change the CCA settings to turn off communications to 3PAR HQ. Tried logging in as cpmaint, but I don't remember ever changing the password for this account. Anyone know the default cpmaint password?

Thanks.

Author:  Christian [ Wed Jun 26, 2013 8:45 am ]
Post subject:  Re: cpmaint

I think this is done on the SP ?
Try using the Spvar account.

Author:  gkapoor [ Wed Jun 26, 2013 9:52 am ]
Post subject:  Re: cpmaint

Or try using 3parcust as username and default password for that.

Thanks.

Author:  afidel [ Tue Jul 02, 2013 4:47 pm ]
Post subject:  Re: cpmaint

This has to be done at setup time or by using cpmaint which is set by the factory. Because always on reverse-tunnel was not acceptable in our security policy but using rooms is painful I was able to get the cpmaint password out of someone so that I can turn on the tunnel during installs/troubleshooting and turn it back off when the work is done. The fact that you can't do this post install with a customer account is frankly stupid.

Author:  ianbow [ Thu Dec 05, 2013 10:40 am ]
Post subject:  Re: cpmaint

Guys,

Is there anyone which can share the cpmaint password with me as I would like to setup my callhome feature to use a proxy but need to login using this account to change the CCA configuration?

Regards,

Author:  Josh26 [ Thu Dec 05, 2013 4:52 pm ]
Post subject:  Re: cpmaint

afidel wrote:
Because always on reverse-tunnel was not acceptable in our security policy


The fact that it's acceptable under any security policy is worrying to me. Who's got access to the other end? If something is compromised, who is to blame? When someone can logon as "root", the claim "it's impossible for us to access your data" is provably false.

Author:  MDPlatts [ Thu May 22, 2014 4:13 am ]
Post subject:  Re: cpmaint

ianbow wrote:
Guys,

Is there anyone which can share the cpmaint password with me as I would like to setup my callhome feature to use a proxy but need to login using this account to change the CCA configuration?

Regards,



I'm in the same boat and could do with knowing what the default is - as the "change password" option doesnt offer this account and "add user" says it already exists!

Author:  Cleanur [ Thu May 22, 2014 10:46 am ]
Post subject:  Re: cpmaint

Sorry you'll have to log a call. This stuff isn't even handed out internally.

Author:  BryanW [ Thu May 22, 2014 10:55 am ]
Post subject:  Re: cpmaint

Have you tried blocking outbound access at your firewall either from the SP IP address or to addresses listed in the SP setup document they give you when you get the array? That way you have local control to turn it off/on if you have an actual issue and want to kick off an insplore etc.

Bryan @ Match.com

Author:  MDPlatts [ Thu May 22, 2014 10:57 am ]
Post subject:  Re: cpmaint

Cleanur wrote:
Sorry you'll have to log a call. This stuff isn't even handed out internally.


I sorted it by just re-running the SpSetupWizard.html site - and it lets you set the proxy address - it seems to be an oversight that you cannot change it - though I can sort of understand it from a security/preventiing-diverting-traffic point of view.

Page 1 of 3 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/