HPE Storage Users Group https://3parug.org/ |
|
Cage IO Card Spedd is not correct https://3parug.org/viewtopic.php?f=18&t=3716 |
Page 1 of 1 |
Author: | kurbennett64 [ Thu Dec 09, 2021 10:08 am ] |
Post subject: | Cage IO Card Spedd is not correct |
I have 2 cages in my 3par 8400 that show a 6GB Speed on an IO Card DP port versus the 12GB. Any ideas? Interface Cards Name Ports Speed (Gbps) Serial Number Firmware State Firmware Version Card 0 DP-1,DP-2 12 EEAUDA1TF8YBB9 Current 409b Card 1 DP-1,DP-2 6 EEAUDA1TF8YBFZ Current 409b |
Author: | cali [ Wed Dec 29, 2021 9:04 am ] |
Post subject: | Re: Cage IO Card Spedd is not correct |
You can check for Faults: cli% cgcmd -tc tty -C cageX -c report_faults -p a cli% cgcmd -tc tty -C cageX -c report_faults -p b Usually, the Support reboot the IO Module and this fixes it. If you have no Support, try this: cli% cgcmd -tc tty -C cageX -c reboot soft 5 -p b |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |