HPE Storage Users Group https://3parug.org/ |
|
Drive Tray Screws https://3parug.org/viewtopic.php?f=18&t=3759 |
Page 1 of 1 |
Author: | kcgsupport [ Thu Mar 10, 2022 1:44 pm ] |
Post subject: | Drive Tray Screws |
Does anyone happen to know what kind of screws are used for attaching drives to the drive trays? (For an 8200, but they seem to be pretty standard across models...) I would have thought that I could find some workable replacements in the giant vat of odd screws we have, but no such luck - any that have the right threads don't sit flush enough to let the tray actually go into the cage. |
Author: | Richard Siemers [ Sun Mar 13, 2022 11:52 pm ] |
Post subject: | Re: Drive Tray Screws |
Most, if not all, 2.5" drives use a M3 x 3mm screw. You can find some various head options on Amazon to fit the task. The traditional 3.5" and 5.25" drives typically use a #6-32 threaded screw. |
Author: | kcgsupport [ Mon Mar 21, 2022 10:05 am ] |
Post subject: | Re: Drive Tray Screws |
Thanks - the threads seem correct on those, but the heads on any I can find aside from what comes with them are too big and won't sit flush on the non-recessed side. I thought there might be some specific difference. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |