HPE Storage Users Group https://3parug.org/ |
|
HP 3PAR StoreServ Storage - Node Rescue Fails Replacing Node https://3parug.org/viewtopic.php?f=18&t=3839 |
Page 1 of 1 |
Author: | sebastian7780_2 [ Mon Oct 03, 2022 3:06 pm ] | ||
Post subject: | HP 3PAR StoreServ Storage - Node Rescue Fails Replacing Node | ||
Hello. I can't finish the Node Rescue process. It is a 3PAR 72000 MU6. I am installing a new node which is OK. It performs the entire process but fails due to "space" issues. I have made several node changes and this is the first time it has happened to me. The IDE disk is the same as the other NODE (blue). I have run all known processes from the WACK> In short, I follow all the steps and execute: whack>unset sys_serial whack>ahci init Whack>ide erase whack>reset Everything runs ok, but never joins the cluster and ends with this error [ 45.018834] Total CM for this node is 4 GB [ 45.018838] patrol_delay 4614 msecs [ 45.018850] Starting eagle_cm_patrol_thread.... [ 45.018853] Num Srcs 14 Src Size 16384 [ 45.060562] Starting scan mir log thread 0x226b [ 45.060564] Setting recovery log scan delay to 292 ms init: Loading tpd kernel module: done. init: Remapping interrupts init: WARNING: irq name contains comma delimited list [aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv 0x70, aerdrv] init: WARNING: irq name contains comma delimited list [nemoe 0x78, Eos intr] init: Loading tpd kernel patch modules: Patch99 Patch110 Patch114 P119 Patch135 Patch138 Patch139 Patch142 Patch149 Patch160 Patch165 init: Configuring powerfail device /dev/pfail_storage: 801 init: done. init: Initializing eanet0: done. init: Rotating PM logs: done. init: Rotating PR event logs: done. init: Starting Process Manager: pm. init: Rotating pr_sync_ide logs: done. init: Starting PR Sync IDE: pr_sync_ide. init: coreman: tpdinit run at epoch=1664819228sec with boot at epoch=1664819176sec init: coreman: file system usage - /dev/sda7 - used=15227584KB (used-core=172KB) free=46257040KB total=61484624KB init: coreman: space removal targets - freeMin=0KB freePct=0KB corePct=0KB targetToRemove=0KB targetToRemoveMinLow=0KB init: coreman: exit - no free space requirements to satisfy init: Launching tpd_cfg_tornado_dcncage script to work around 'Configures a Tornado Enclosures DP-1 port' issue init: Running l 3PAR(R) InForm(tm) OS 3.2.2.709 1612423-1 ttyS0 1612XXX-1 login: I Put the log file here. I do not have current support from HPE. I will greatly appreciate the help. Thanks!!!! Sebastian.
|
Author: | MammaGutt [ Mon Oct 03, 2022 11:30 pm ] |
Post subject: | Re: HP 3PAR StoreServ Storage - Node Rescue Fails Replacing |
I see one important line in there… Quote: [ 42.647579] Node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster [ 42.675598] Remote node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster [ From the looks of it you have a 7200c replacement node in a 7200 system…. or the other way around. |
Author: | sebastian7780_2 [ Tue Oct 04, 2022 7:50 am ] |
Post subject: | Re: HP 3PAR StoreServ Storage - Node Rescue Fails Replacing |
MammaGutt wrote: I see one important line in there… Quote: [ 42.647579] Node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster [ 42.675598] Remote node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster [ From the looks of it you have a 7200c replacement node in a 7200 system…. or the other way around. Thanks for your answer. Are the nodes not compatible with each other? This compatibility is not achieved with the procedure in the Wack> ? From Whack> on the replacement node issue prom edit <CR>. Then hit return to see each item in the prom. SMI Whack>prom edit Board Spin: 03 Size * 256 bytes: 04 Board Class: 920 Board Base: 200040 Board Rev: 91 Assembly Vendor: FXN Assembly Year: 2012 Assembly Week: 30 Assembly Day: 03 Assembly Serial: 00103530 Alternate Class: ffff Alternate Base: ffff Alternate Dash: ff System Serial: 9902109 Node ID: 03 FF or value of slot node is installed in Midplane Type: 1b See Below for current settings. Node Type: 40 SMI Whack> Midplane and Node Type must match the other nodes. This list will change as new models are released . Current selections as of August 2014 are StoreServ 7200: Mid-plane Type 1a Node Type 20 StoreServ 7400: Mid-plane Type 1b Node Type 40 StoreServ 7450: Mid-plane Type 1e Node Type 80 |
Author: | MammaGutt [ Tue Oct 04, 2022 8:54 am ] |
Post subject: | Re: HP 3PAR StoreServ Storage - Node Rescue Fails Replacing |
sebastian7780_2 wrote: MammaGutt wrote: I see one important line in there… Quote: [ 42.647579] Node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster [ 42.675598] Remote node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster [ From the looks of it you have a 7200c replacement node in a 7200 system…. or the other way around. Thanks for your answer. Are the nodes not compatible with each other? This compatibility is not achieved with the procedure in the Wack> ? From Whack> on the replacement node issue prom edit <CR>. Then hit return to see each item in the prom. SMI Whack>prom edit Board Spin: 03 Size * 256 bytes: 04 Board Class: 920 Board Base: 200040 Board Rev: 91 Assembly Vendor: FXN Assembly Year: 2012 Assembly Week: 30 Assembly Day: 03 Assembly Serial: 00103530 Alternate Class: ffff Alternate Base: ffff Alternate Dash: ff System Serial: 9902109 Node ID: 03 FF or value of slot node is installed in Midplane Type: 1b See Below for current settings. Node Type: 40 SMI Whack> Midplane and Node Type must match the other nodes. This list will change as new models are released . Current selections as of August 2014 are StoreServ 7200: Mid-plane Type 1a Node Type 20 StoreServ 7400: Mid-plane Type 1b Node Type 40 StoreServ 7450: Mid-plane Type 1e Node Type 80 Nodes need to be indentical. 7200 and 7200c are not (7200c has more CPU cores and I believe also control/data cache) |
Author: | sebastian7780_2 [ Wed Oct 05, 2022 8:43 am ] |
Post subject: | Re: HP 3PAR StoreServ Storage - Node Rescue Fails Replacing |
Mammagutt You were right,. The problem has already been resolved. 7200 node was being used in a 3PAR 7200c. all ok! Thank you very much. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |