Quote:
% checkhealth -detail node
Checking node
Component ----------------Description----------------- Qty
Node PCI card model differs for slot in node pair 4
Component -Identifier- ----------------------Description----------------------
Node node:0 PCI card in Slot:1 is empty, but is not empty in Node:1
Node node:1 PCI card in Slot:1 is empty, but is not empty in Node:0
Node node:2 PCI card in Slot:1 is empty, but is not empty in Node:3
Node node:3 PCI card in Slot:1 is empty, but is not empty in Node:2
I believe this is a new(ish) check for port persistence features. For port persistence to work, I believe its required that the Cards line up between node pairs.
I have chased CRC errors like that before, in my situation it was resolved after replacing both FCALs on the shelf (the boards the SFPs plug into).