HPE Storage Users Group https://3parug.org/ |
|
Partitioned drives for T800 https://3parug.org/viewtopic.php?f=18&t=674 |
Page 1 of 1 |
Author: | NECSJT [ Thu Apr 17, 2014 10:29 am ] |
Post subject: | Partitioned drives for T800 |
I recently aquired 2TB drives for a T800 and it turns ou that some of them have been partitoned to 1TP and 750GB is there a way to repartition them back to 2TB? |
Author: | Richard Siemers [ Fri Apr 18, 2014 2:58 pm ] |
Post subject: | Re: Partitioned drives for T800 |
I wonder if these were t2TB drives that were used to swap out a failed 1TB or 750Gb drive, so it was rigged to look/act like the proper drive size... How are you able to see the partitions now? I wonder if the drive hardware has a jumper on it that tells it physically emulate a previously discontinued drive size for warranty replacement purposes and compatability... |
Author: | corge [ Mon Apr 21, 2014 11:20 am ] |
Post subject: | Re: Partitioned drives for T800 |
It's a bit setting in the firmware from HP. You will need to contact HP. We have some T-series with 1TB drives in them. During the Tsunami deal a few years ago, HP didn't have the 1TB on hand, so they upgraded a patch on our inservs and sent us 2TB hard drives that appear as 1TB hard drives. Nothing we can do to those since they have the HP firmware on them. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |