HPE Storage Users Group https://3parug.org/ |
|
3PAR/ESXi Persona Changes https://3parug.org/viewtopic.php?f=18&t=754 |
Page 1 of 2 |
Author: | grayskull [ Wed Jun 04, 2014 9:34 am ] |
Post subject: | 3PAR/ESXi Persona Changes |
Having recently upgraded to 3.1.2(MU3) I've read quite a lot about persona changes on ESXi hosts etc Has anyone had any experience of this ? What is actually required on both the Array and the VMHost itself ? Thanks Dave |
Author: | hdtvguy [ Wed Jun 04, 2014 11:36 am ] |
Post subject: | Re: 3PAR/ESXi Persona Changes |
VM Host has to be powered off to make the change. The new persona I believe is required in a future update. |
Author: | Davidkn [ Wed Jun 04, 2014 3:23 pm ] |
Post subject: | Re: 3PAR/ESXi Persona Changes |
I believe 3.1.3 is the last release to have the old VMware persona, the new one is the better one to use moving forward using ALUA, and is required for things like peer persistence. |
Author: | Richard Siemers [ Fri Jun 06, 2014 3:08 pm ] |
Post subject: | Re: 3PAR/ESXi Persona Changes |
Can this be one just one host at a time? |
Author: | afidel [ Fri Jun 06, 2014 3:43 pm ] |
Post subject: | Re: 3PAR/ESXi Persona Changes |
I haven't done this with VMWare as our array started on 3.1.2 so we started with the new persona, but I did just yesterday change some Windows boxes inadvertently. I was in double checking everything for our upcoming hardware expansion and OS upgrade and I noted that some of our online imported hosts that were auto-created during the migration process weren't showing the full OS version, and when I changed them it also changed them from persona 1 to persona 2 without any ill effect. |
Author: | Davidkn [ Fri Jun 06, 2014 5:01 pm ] |
Post subject: | Re: 3PAR/ESXi Persona Changes |
Richard Siemers wrote: Can this be one just one host at a time? I would have thought so, even with hosts in a host set, as I've seen VMware servers and a windows server in one before I think. From a VMware cluster pov it would be fine doing it one at a time. One thing to note though is if you had changed the default satp setting on the host via the cli, as the default behaviour has changed from active/active to ALUA. With host persona 11 it would be # esxcli storage nmp satp rule add -s "VMW_SATP_ALUA" -P "VMW_PSP_RR" -O iops=1 -c "tpgs_on" -V "3PARdata" -M "VV" -e "HP 3PAR Custom iSCSI/FC/FCoE ALUA Rule" With persona 6 it would have been # esxcli storage nmp satp rule add -s "VMW_SATP_DEFAULT_AA" -P "VMW_PSP_RR" -O iops=100 -c "tpgs_off" -V "3PARdata" -M "VV" -e "HP 3PAR Custom iSCSI/FC/FCoE ALUA Rule" Also remember that the latest best practice also states that you should change the iops from 1000 to 1 (it used to be 100) |
Author: | bajorgensen [ Sun Jun 08, 2014 7:43 am ] |
Post subject: | Re: 3PAR/ESXi Persona Changes |
As painful as it is; just get it done. Might as well do it as you implement the new claim rules with IOPS=1 anyway... |
Author: | grayskull [ Mon Jun 09, 2014 2:35 am ] |
Post subject: | Re: 3PAR/ESXi Persona Changes |
Quote: Also remember that the latest best practice also states that you should change the iops from 1000 to 1 (it used to be 100) Where did you get this information from ? |
Author: | bajorgensen [ Mon Jun 09, 2014 3:48 am ] |
Post subject: | Re: 3PAR/ESXi Persona Changes |
It is in the updated VMware best practice guide. The ESX implementation guide still says IOPS=100, but HP has confirmed IOPS=1 is the new best practice. |
Author: | grayskull [ Mon Jun 09, 2014 3:56 am ] |
Post subject: | Re: 3PAR/ESXi Persona Changes |
IT might be worth my while trying to get HP to confirm this for me too ... seeing as we have a bunch of persona changes to do! |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |