HPE Storage Users Group https://3parug.org/ |
|
good view in CLI and GUI to see AO activity https://3parug.org/viewtopic.php?f=18&t=940 |
Page 1 of 1 |
Author: | mohuddle [ Mon Oct 06, 2014 9:04 am ] |
Post subject: | good view in CLI and GUI to see AO activity |
What commands or view in the 3PAR GUI can be use to see what hosts and how much were AO'd to the SSD? EDIT: Ran AO reports and still trying to decipher. Can someone help interpret? Looks like data was move from 0 to 1 and 1 to 0. What is the difference between USR and ADM space? Is the space moved in MiB as shown in the charts? Name Src Tier Dest Tier Space Space Moved Tier2AO 0 1 usr 357504.0 Tier2AO 0 1 adm 1664.0 Tier2AO 1 0 usr 1023104.0 Tier2AO 1 0 adm 3264.0 |
Author: | hdtvguy [ Mon Oct 06, 2014 9:29 am ] |
Post subject: | Re: good view in CLI and GUI to see AO activity |
sraomoves DESCRIPTION The sraomoves command shows the space that Adaptive Optimization (AO) has moved between tiers. S YNT AX sraomoves [options] AUTHORITY Any role in the system OPTIONS -btsecs <secs> Select the begin time in seconds for the report . The value can be specified as either: • The absolute epoch time (for example 1 35 1 263600). • The absolute time as a text string in one of the follo wing formats: Full time string including time zone: "20 1 2- 1 0- 26 1 1 :00:00 PDT" ◦ ◦ Full time string excluding time zone: "20 1 2- 1 0- 26 1 1 :00:00" ◦ Date string: "20 1 2- 1 0- 26" or 20 1 2- 1 0- 26 ◦ Time string: "1 1 :00:00" or 1 1 :00:00 • A negative number indicating the number of seconds before the current time . Instead of a number representing seconds, <secs> can be specified with a suffix of m, h or d to represent time in minutes (e.g. -30m), hours (e.g. - 1 .5h) or days (e.g. - 7d). If it is not specified then the report begins at the earliest sample. If it is not specified then the time at which the report begins depends on the sample category (-hires, -hourly, -daily): • -F or hires, the default begin time is 1 2 hours ago (-btsecs - 1 2h). • For hourly , the default begin time is 7 days ago (-btsecs - 7d). • For daily , the default begin time is 90 days ago (-btsecs -90d). If begin time and sample category are not specified then the time the report begins is 1 2 hours ago and the default sample category is hires. If -btsecs 0 is specified then the report begins at the earliest sample. -oneline Show data in simplified format with one line per AOCFG. -etsecs <secs> sraomoves 5 27 Select the end time in seconds for the report . The value can be specified as either: • The absolute epoch time (for example 1 35 1 263600). • The absolute time as a text string in one of the follo wing formats: Full time string including time zone: "20 1 2- 1 0- 26 1 1 :00:00 PDT" ◦ ◦ Full time string excluding time zone: "20 1 2- 1 0- 26 1 1 :00:00" ◦ Date string: "20 1 2- 1 0- 26" or 20 1 2- 1 0- 26 ◦ Time string: "1 1 :00:00" or 1 1 :00:00 • A negative number indicating the number of seconds before the current time . Instead of a number representing seconds, <secs> can be specified with a suffix of m, h or d to represent time in minutes (e.g. -30m), hours (e.g. - 1 .5h) or days (e.g. - 7d). If it is not specified then the report begins at the earliest sample. –sortcol <col> [,<dir>][:<col>[,<dir>]...] Sorts command output based on the column number (<col>). Columns are numbered from left to right , beginning with 0. At least one column must be specified. In addition, the direction of sorting <dir> can be specified as follo ws: inc Sort in increasing order (default). dec Sort in decreasing order . Multiple columns can be specif ied and separated by a colon (:). Rows that have the same inf ormation in them as earlier columns will be sorted by values in later columns. SPECIFIERS None RESTRICTIONS None EXAMPLE S The follo wing example shows space moved by AO beginning 2 hours (7200 seconds) ago: cli% sraomoves -btsecs -7200 NOTE S For this command: 1 MB = 1 04857 6 bytes. The space reported is the space that AO has requested to be moved; the actual space moved could be less (for example, if the move failed). |
Author: | mohuddle [ Mon Oct 06, 2014 9:51 am ] |
Post subject: | Re: good view in CLI and GUI to see AO activity |
Perfect, thank you. |
Author: | mohuddle [ Mon Oct 06, 2014 1:34 pm ] |
Post subject: | Re: good view in CLI and GUI to see AO activity |
And usr must be actual user data and adm is some sort of meta/control data for 3PAR internal usage, tracking, etc? |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |