Our unit has got Factory Warranty and it came installed with the latest necessary software and License.
After several tries, i decided to check the health of the 3PAR system then i found out that it was unable to detect the B Loop of 6 of my cages, so i started checking the fibre connection (cable and SFP modules) to the NODEs then i saw that the Rx on the B loops were not active.
I changed all the Cable for the B loops and all Rx came up. So i ran the checkhealth command again and it was able to talk to all cage and drives.
The next thing i did was to use the option 7 (Set up the system to wipe and rerun ootb) of the Console menu and that also went well as well, i re-ran the OOTB, updated network configuration and then the system manager swung into operation, checking disk, creating admin volume etc.
|