Hello,
Does anyone know what the replacement procedure looks like for a failed boot device.
A customer has a CS300 that's out of support and the internal USB OS(boot) device has failed.
Thanks
Adam
CS300 internal usb failed
- Richard Siemers
- Site Admin
- Posts: 1331
- Joined: Tue Aug 18, 2009 10:35 pm
- Location: Dallas, Texas
Re: CS300 internal usb failed
It involves imaging the new USB with the image of boot code for the NimbleOS version to match your active node. I am not sure what the process is for getting a copy of that after you are off support. You can try to call Nimble support, they will tell you what they can do for free vs what requires Time & Materials.
Typically that imaging is done from a laptop/workstation, then then drive replaced in the node.
Typically that imaging is done from a laptop/workstation, then then drive replaced in the node.
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
The views and opinions expressed are my own and do not necessarily reflect those of my employer.