Error : Pd id 89 is referenced by chunklet 96:1063

[Juliano]

Hello there,

During a simple change disk replace some was occured unexpectly (to me):

Verified failed disk:

cli% showpd -failed -degraded
--Size(MB)-- ----Ports----
Id CagePos Type RPM State Total Free A B Capacity(GB)
89 3:23:0? FC 10 failed 1142784 0 ----- ----- 1200
------------------------------------------------------------------
1 total 1142784 0

Verified non-failed chunklets:

cli% showpd -space 89
------------------(MB)-------------------
Id CagePos Type -State- Size Volume Spare Free Unavail Failed
89 3:23:0? FC failed 1142784 0 0 0 0 1142784
-----------------------------------------------------------------
1 total 1142784 0 0 0 0 1142784

Verified servicemag status:

cli% servicemag status
No servicemag operations logged.

Ok: it's time to replace disk: disk changed in position 3:23:0 (it was removed failed ID89 and new one has received ID82)

cli% showpd -i
Id CagePos State ----Node_WWN---- --MFR-- -----Model------ -Serial- -FW_Rev- Protocol MediaType -----AdmissionTime-----
...
82 3:23:0 normal 5000CCA0438327B3 HITACHI HCBRE0900GBAS10K KVJA41KR 3P02 SAS Magnetic 2023-06-22 10:15:56 -03
...
89 3:23:0? failed 5000CCA02D5CB43B HGST HCBF1200S5xeN010 06HMZHKA 3P05 SAS Magnetic 2017-06-24 12:01:22 -03
...
120 2:11:0 normal 5000CCA0717525E7 HITACHI HCBRE0900GBAS10K W8J2E7MG 3P02 SAS Magnetic 2017-08-03 10:22:26 -03
-------------------------------------------------------------------------------------------------------------------------
121 total

Ok, lets delete old ID:

cli% dismisspd 89
Error : Pd id 89 is referenced by chunklet 96:1063

Failed. Deeping info:

cli% showpd -c 89
------- Normal Chunklets -------- ---- Spare Chunklets ----
- Used - -------- Unused -------- - Used - ---- Unused ----
Id CagePos Type State Total OK Fail Free Uninit Unavail Fail OK Fail Free Uninit Fail
89 3:23:0? FC failed 1116 0 0 0 568 0 548 0 0 0 0 0
----------------------------------------------------------------------------------------
1 total 1116 0 0 0 568 0 548 0 0 0 0 0

cli% showpdch 89
No chunklet information available.

For my surprise, there are some chuncklets in "normal" state.

The old disk was removed and the new one is "normal" at this time. What is possible do to remove the old disk ID89?

Best Regards,
Juliano Flores

[MammaGutt]

Code: Select all

movech -perm -ovrd 96:1063

will remove your current error message.

There might be more of them

Code: Select all

showpdch -mov

or

Code: Select all

showpdch 89

might sched some light on what you're facing.

[Juliano]

Hello, MAmmaGutt!

You're correct! Problem solved!

cli% movech -perm -ovrd 96:1063
Are you sure you want to move the chunklets?
select q=quit y=yes n=no: y
Move -State- -Detailed_State-
96:1063-8:78 normal normal

cli% dismisspd 89
Error : Pd id 89 is referenced by chunklet 96:1064
....

I was lucky: repeting "movech" for more 10x, "dismisspd" has accepted and the old ID was removed permanently.

Thank you a lot!

Best Regards,
Juliano