Hi all,
We have had a node fail in our 8200. It was completely dead with no lights. We have had this replaced at the new node seems to have the 2 ports configured for RCFC missing. The node is part of the cluster and is passing traffic (other than RCFC).
When you run showport they are completely missing.
I was wondering if anyone had any thoughts please? How can we get the system to see these ports again?
Thank You
RCFC NetworkInterfaces Missing After Node Replacement
Re: RCFC NetworkInterfaces Missing After Node Replacement
I would do "showport" in CLI and if they are there....
Not sure who replaced the node and where it came from, but if you're missing 2 ports it could be the onboard FC HBA that's dead.
Not sure who replaced the node and where it came from, but if you're missing 2 ports it could be the onboard FC HBA that's dead.
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.
-
Richard Siemers
- Site Admin
- Posts: 1333
- Joined: Tue Aug 18, 2009 10:35 pm
- Location: Dallas, Texas
Re: RCFC NetworkInterfaces Missing After Node Replacement
Did the old node have an additional IO Card installed that should have been moved to the new node?
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
The views and opinions expressed are my own and do not necessarily reflect those of my employer.