3PAR 7400 controller error

Post Reply
User avatar
Richard Siemers
Site Admin
Posts: 1331
Joined: Tue Aug 18, 2009 10:35 pm
Location: Dallas, Texas

Re: 3PAR 7400 controller error

Post by Richard Siemers »

I suspect the OP lives in a country with severe trade restrictions imposed by U.S. and other nations, which explains why calling/getting support from HP is not an option. Steve what country is the broken 3PAR located in?
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
Top
steve_carlose
Posts: 34
Joined: Thu Jan 30, 2014 1:36 am

Re: 3PAR 7400 controller error

Post by steve_carlose »

is in Armenia
Top
User avatar
Richard Siemers
Site Admin
Posts: 1331
Joined: Tue Aug 18, 2009 10:35 pm
Location: Dallas, Texas

Re: 3PAR 7400 controller error

Post by Richard Siemers »

Are your VSP and Nodes on the same physical subnet so that Bootp/dhcp/pxe boot will work?
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
Top
steve_carlose
Posts: 34
Joined: Thu Jan 30, 2014 1:36 am

Re: 3PAR 7400 controller error

Post by steve_carlose »

Hello every body.
Finally my problem was solved.I changed the SSD drive :)

Best Regards
Top
User avatar
Richard Siemers
Site Admin
Posts: 1331
Joined: Tue Aug 18, 2009 10:35 pm
Location: Dallas, Texas

Re: 3PAR 7400 controller error

Post by Richard Siemers »

Hello Steve -

What connection settings did you use to connect to the controller serial port?
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
Top
Post Reply

Return to “3PAR Discussion”