Any gotchas to watch out for hooking up Cisco UCS servers through FI to 3PAR though Brocade fabric? Just curious if anyone had any issues or any pitfalls to avoid.
-John
UCS Gotchas
Re: UCS Gotchas
we are using 3par with UCS IC directly, no other switches between them. works great, IC few ports are in FC Switching mode. all the zoning done on IC directly.
Re: UCS Gotchas
To my knowledge you are fully supported as long as you run any 2.x version of UCS software. There should be a full list of supported UCS hardware and software versions on SPOCK under "additional hardware 3PAR OS 3.x.x" if I recall correctly.
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.