HPE Storage Users Group

Any gotchas to watch out for hooking up Cisco UCS servers through FI to 3PAR though Brocade fabric? Just curious if anyone had any issues or any pitfalls to avoid.

-John

we are using 3par with UCS IC directly, no other switches between them. works great, IC few ports are in FC Switching mode. all the zoning done on IC directly.

Thanks for the response.

To my knowledge you are fully supported as long as you run any 2.x version of UCS software. There should be a full list of supported UCS hardware and software versions on SPOCK under "additional hardware 3PAR OS 3.x.x" if I recall correctly.