Hello guys,
i am wandering what can cause excessive service time while the IOPs and bandwith are stable.
Does anyone have an explanation how is that possible, what can i check to diagnose or avoid that?
Exported volumes performance graph
Exported volumes performance graph
- Attachments
-
- 3par perf.PNG (94.33 KiB) Viewed 17527 times
Re: Exported volumes performance graph
Could you sched some more light on this?
Is this graph for the entire system?
What system is it and what drives?
How is CPU on the system?
My first guess would be that this is statvlun and you have host/fabric issues. Or that this is frontend performance and you have something totally different going on in the backend.
Is this graph for the entire system?
What system is it and what drives?
How is CPU on the system?
My first guess would be that this is statvlun and you have host/fabric issues. Or that this is frontend performance and you have something totally different going on in the backend.
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.
Re: Exported volumes performance graph
Hello MammaGutt,
this is a graph of all the exported VVs, so one can say it is a front end representation.
The system is 8400, the disks 15TB SSDs
The CPU strangely between 16th and 20th of May ( the time for the big service time) is used on 87% for some reason.
Can you be more specific on what you mean by host/fabric issues?
As there is no visible cause for the high service time, i am wandering how can we drill down to the root cause. If we had some VV or VVset being hit with too many IOps or too big block sizes ...
but all seems relatively level and just the service time spikes.
this is a graph of all the exported VVs, so one can say it is a front end representation.
The system is 8400, the disks 15TB SSDs
The CPU strangely between 16th and 20th of May ( the time for the big service time) is used on 87% for some reason.
Can you be more specific on what you mean by host/fabric issues?
As there is no visible cause for the high service time, i am wandering how can we drill down to the root cause. If we had some VV or VVset being hit with too many IOps or too big block sizes ...
but all seems relatively level and just the service time spikes.
-
Richard Siemers
- Site Admin
- Posts: 1331
- Joined: Tue Aug 18, 2009 10:35 pm
- Location: Dallas, Texas
Re: Exported volumes performance graph
What services are you using? Such as dedupe, compression, snapshots, replication? Were you compacting a cpg by change? Zero in on what services were causing the CPU spike.
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
Re: Exported volumes performance graph
Yavor wrote:Hello MammaGutt,
this is a graph of all the exported VVs, so one can say it is a front end representation.
The system is 8400, the disks 15TB SSDs
The CPU strangely between 16th and 20th of May ( the time for the big service time) is used on 87% for some reason.
Can you be more specific on what you mean by host/fabric issues?
As there is no visible cause for the high service time, i am wandering how can we drill down to the root cause. If we had some VV or VVset being hit with too many IOps or too big block sizes ...
but all seems relatively level and just the service time spikes.
By host I mean CPU thru the roof or hardware issue.
By fabric I mean congrested ISLs or hardware issues.
3PAR 8400 isn't a very powerful controller node. If you have a lot of the 15TB SSDs, you very quickly run out of horsepower.... Considering the price difference between a 8400 and a 8440/8450 ( significant more CPU, significant more cache) is somewhere in the area of maybe two of those SSDs (or at least a low single digit percentage) I just don't get it.
As Richard asks, are you using dedupe or compression? If yes, I'm pretty sure your node CPU and backend IOps looks totally different to your frontend and matches your peaks.
What 3PAR OS version?
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.
Re: Exported volumes performance graph
Hello again,
we are running 3.3.1 MU5 up to P156
Replication, compresion, snapshots or deduplication are not used.
The fabrics did not have congestion.
Hosts (~250) are mainly ESXi's, so no excessive CPU utilization.
Unless some automatic compaction was running we did not run it manually.
What would be the report most representative for the load on the back end?
we are running 3.3.1 MU5 up to P156
Replication, compresion, snapshots or deduplication are not used.
The fabrics did not have congestion.
Hosts (~250) are mainly ESXi's, so no excessive CPU utilization.
Unless some automatic compaction was running we did not run it manually.
What would be the report most representative for the load on the back end?