Page 1 of 2
Upgrade 3par os from version 3.3.1 to 3.3.2
Posted: Wed May 31, 2023 3:06 am
by pazzoide76
HI,
I have a 3par8200 with the following firmware:
3PAR: 3.3.1.410 (MU2)+P32,P40,P45,P51,P52,P60,P76,P90,P96,P111,P113
Crtical patches P142, P157, P165
and the vsp version 5.1.1.0-29341
I would like to upgrade to 3.3.2 as I want to install vsphere 8.0.
How many steps do I have to take?
What are the patches and firmwares that I have to install?
What is the latest patch/build of 3par os 3.3.2?
Where do I download patches and firmwares?
Thank you
Greetings
Re: Upgrade 3par os from version 3.3.1 to 3.3.2
Posted: Wed May 31, 2023 6:30 am
by MammaGutt
pazzoide76 wrote:HI,
I have a 3par8200 with the following firmware:
3PAR: 3.3.1.410 (MU2)+P32,P40,P45,P51,P52,P60,P76,P90,P96,P111,P113
Crtical patches P142, P157, P165
and the vsp version 5.1.1.0-29341
I would like to upgrade to 3.3.2 as I want to install vsphere 8.0.
How many steps do I have to take?
Apply latest U Kit
Upgrade to 3.3.2 GA
See SPOCK -> "Other Hardware" -> "HPE 3PAR" -> "HPE 3PAR OS and Service Processor Upgrade Matrix"
pazzoide76 wrote:What are the patches and firmwares that I have to install?
See SPOCK -> "Software" -> "HPE 3PAR" -> "HPE 3PAR Upgrade/Patch Recommendations" for the version you are running/aiming for.
pazzoide76 wrote:What is the latest patch/build of 3par os 3.3.2?
3.3.2 MU1 P08 is latest according to SPOCK.
pazzoide76 wrote:Where do I download patches and firmwares?
HPE My enterprise licensing portal. Usually the SP will auto-download this for you.
Re: Upgrade 3par os from version 3.3.1 to 3.3.2
Posted: Wed May 31, 2023 6:59 am
by pazzoide76
MammaGutt wrote:pazzoide76 wrote:HI,
I have a 3par8200 with the following firmware:
3PAR: 3.3.1.410 (MU2)+P32,P40,P45,P51,P52,P60,P76,P90,P96,P111,P113
Crtical patches P142, P157, P165
and the vsp version 5.1.1.0-29341
I would like to upgrade to 3.3.2 as I want to install vsphere 8.0.
How many steps do I have to take?
Apply latest U Kit
Upgrade to 3.3.2 GA
See SPOCK -> "Other Hardware" -> "HPE 3PAR" -> "HPE 3PAR OS and Service Processor Upgrade Matrix"
pazzoide76 wrote:What are the patches and firmwares that I have to install?
See SPOCK -> "Software" -> "HPE 3PAR" -> "HPE 3PAR Upgrade/Patch Recommendations" for the version you are running/aiming for.
pazzoide76 wrote:What is the latest patch/build of 3par os 3.3.2?
3.3.2 MU1 P08 is latest according to SPOCK.
pazzoide76 wrote:Where do I download patches and firmwares?
HPE My enterprise licensing portal. Usually the SP will auto-download this for you.
Thanks
Re: Upgrade 3par os from version 3.3.1 to 3.3.2
Posted: Wed May 31, 2023 7:13 am
by pazzoide76
MammaGutt wrote:pazzoide76 wrote:HI,
I have a 3par8200 with the following firmware:
3PAR: 3.3.1.410 (MU2)+P32,P40,P45,P51,P52,P60,P76,P90,P96,P111,P113
Crtical patches P142, P157, P165
and the vsp version 5.1.1.0-29341
I would like to upgrade to 3.3.2 as I want to install vsphere 8.0.
How many steps do I have to take?
Apply latest U Kit
Upgrade to 3.3.2 GA
See SPOCK -> "Other Hardware" -> "HPE 3PAR" -> "HPE 3PAR OS and Service Processor Upgrade Matrix"
pazzoide76 wrote:What are the patches and firmwares that I have to install?
See SPOCK -> "Software" -> "HPE 3PAR" -> "HPE 3PAR Upgrade/Patch Recommendations" for the version you are running/aiming for.
pazzoide76 wrote:What is the latest patch/build of 3par os 3.3.2?
3.3.2 MU1 P08 is latest according to SPOCK.
pazzoide76 wrote:Where do I download patches and firmwares?
HPE My enterprise licensing portal. Usually the SP will auto-download this for you.
Excuse my ignorance but what is the U Kit?
Thank you
Re: Upgrade 3par os from version 3.3.1 to 3.3.2
Posted: Wed May 31, 2023 7:32 am
by pazzoide76
MammaGutt wrote:pazzoide76 wrote:HI,
I have a 3par8200 with the following firmware:
3PAR: 3.3.1.410 (MU2)+P32,P40,P45,P51,P52,P60,P76,P90,P96,P111,P113
Crtical patches P142, P157, P165
and the vsp version 5.1.1.0-29341
I would like to upgrade to 3.3.2 as I want to install vsphere 8.0.
How many steps do I have to take?
Apply latest U Kit
Upgrade to 3.3.2 GA
See SPOCK -> "Other Hardware" -> "HPE 3PAR" -> "HPE 3PAR OS and Service Processor Upgrade Matrix"
pazzoide76 wrote:What are the patches and firmwares that I have to install?
See SPOCK -> "Software" -> "HPE 3PAR" -> "HPE 3PAR Upgrade/Patch Recommendations" for the version you are running/aiming for.
pazzoide76 wrote:What is the latest patch/build of 3par os 3.3.2?
3.3.2 MU1 P08 is latest according to SPOCK.
pazzoide76 wrote:Where do I download patches and firmwares?
HPE My enterprise licensing portal. Usually the SP will auto-download this for you.
The order that the HPE 3PAR OS and Service Processor Upgrade Matrix gives me is as follows:
Upgrade to sp 5.1.0 I skip this step because I already have 5.1.1.0
Apply lastest U kit
Upgrade to 3.3.2 GA
Apply latest U Kit
Upgrade to 3.3.2 MU1
Once the 3.3.2 MU1 version is installed, can I directly install the MU1 P08 patch?
Thank you
Re: Upgrade 3par os from version 3.3.1 to 3.3.2
Posted: Wed May 31, 2023 7:36 am
by MammaGutt
pazzoide76 wrote:HPE My enterprise licensing portal. Usually the SP will auto-download this for you.
The order that the HPE 3PAR OS and Service Processor Upgrade Matrix gives me is as follows:
Upgrade to sp 5.1.0 I skip this step because I already have 5.1.1.0
Apply lastest U kit
Upgrade to 3.3.2 GA
Apply latest U Kit
Upgrade to 3.3.2 MU1
Once the 3.3.2 MU1 version is installed, can I directly install the MU1 P08 patch?
Thank you[/quote]
P08 does not seem to superseede P04 so I think you need both.
Re: Upgrade 3par os from version 3.3.1 to 3.3.2
Posted: Wed May 31, 2023 7:48 am
by pazzoide76
MammaGutt wrote:pazzoide76 wrote:HPE My enterprise licensing portal. Usually the SP will auto-download this for you.
The order that the HPE 3PAR OS and Service Processor Upgrade Matrix gives me is as follows:
Upgrade to sp 5.1.0 I skip this step because I already have 5.1.1.0
Apply lastest U kit
Upgrade to 3.3.2 GA
Apply latest U Kit
Upgrade to 3.3.2 MU1
Once the 3.3.2 MU1 version is installed, can I directly install the MU1 P08 patch?
Thank you
P08 does not seem to superseede P04 so I think you need both.[/quote]
Excuse my ignorance but what is the U Kit?
When I install the patches do I have to apply the latest U kit?
Thank you
Re: Upgrade 3par os from version 3.3.1 to 3.3.2
Posted: Wed May 31, 2023 12:47 pm
by MammaGutt
pazzoide76 wrote:MammaGutt wrote:pazzoide76 wrote:HPE My enterprise licensing portal. Usually the SP will auto-download this for you.
The order that the HPE 3PAR OS and Service Processor Upgrade Matrix gives me is as follows:
Upgrade to sp 5.1.0 I skip this step because I already have 5.1.1.0
Apply lastest U kit
Upgrade to 3.3.2 GA
Apply latest U Kit
Upgrade to 3.3.2 MU1
Once the 3.3.2 MU1 version is installed, can I directly install the MU1 P08 patch?
Thank you
P08 does not seem to superseede P04 so I think you need both.
Excuse my ignorance but what is the U Kit?
When I install the patches do I have to apply the latest U kit?
Thank you[/quote]
U Kit = Upgrade kit.
Just ensure you have latest installed when you start patching/upgrading. It will ensure that you’re not missing any required patches.
Re: Upgrade 3par os from version 3.3.1 to 3.3.2
Posted: Thu Jun 01, 2023 1:31 am
by pazzoide76
HI,
by Upgrade kit do you mean the HPE 3PAR Upgrade Tool (
https://support.hpe.com/hpesc/public/do ... 2574A.html)?
Thank you
Re: Upgrade 3par os from version 3.3.1 to 3.3.2
Posted: Thu Jun 01, 2023 12:38 pm
by MammaGutt